Another video from Weddingbells with Roseanne and Judith! A step-by-step video tutorial on creating your own hanging garland!
Posts Tagged ‘DIY’
DIY Butterfly Garland
Wednesday, August 4th, 2010Sewn Booklet Project by Arounna Khounnoraj
Saturday, July 24th, 2010
- Paper for your pages (anything will do. A great opportunity use up papers you may already have) – cut this paper to 4 x 5.25in. I used 8 sheets in each book.
- Sewing machine (or thread and needle)
- Craft knife
- Metal ruler
- Cutting mat
Sew along the centre of the book – holding all the pieces together. If you like, you can use a close pin to hold all the pieces together so that the pages don’t move.
Paper Flower Video Tutorial
Friday, June 18th, 2010Check out this video from Weddingbells with Roseanne and our very own Judith! A step-by-step video tutorial on creating your own pretty paper roses using Japanese Watermark tissue!
Book Cover Project by Arounna of bookhou
Wednesday, June 16th, 2010Another inspiring project sent to us from Arounna Khounnoraj of bookhou.
I really like this project – it’s a nice way to add colour to your book shelf or give new life to an old favourite.
What you will need:
book(s)
decorative paper (shown in picture are Chiyogami, printed Nepalese papers, and Carta Varese papers from Italy.)
folding bone
craft knife
ruler
pencil
cutting mat
step 1
Holding the book pages, lay the front and back cover flat in the centre of the decorative paper (on plain side) and take your pencil to trace.
step 2-3
allow about 2-3 inches around the perimeter of the outline drawn – any extra use your xacto knife and ruler to trim. Take your folding bone and score along the top and bottom lines of the pencil lines
step 4
fold over the flaps
step 5
place the book on top of the paper and fold over the flap for the front and back of the book tucking them in under each cover.
step 6
once the book is placed inside the paper rub your fingers all around to crease the edges.
all done!
How to Make Your Own Japanese Paper Wallet
Monday, June 14th, 2010Japanese paper is surprisingly strong! It is a fantastic paper to use when making your own paper wallet or business card holder. Here is how to do it.
Some supplies you will need are: decorative paper, solid colour paper, utility knife, ruler, paste, bone folder (not pictured) and konnyaku starch, mixing jar and brush (optional).
I chose to konnyaku the paper for my wallets before hand. Konnyaku is a starch processed from the tuberous root of the devil’s tongue plant and is used in many food products in Japan. It has also been used for centuries to coat papers for use in making kamiko (paper clothing). Paper treated with konnyaku becomes much stronger, water resistant and more flexible. This step is optional but will help your wallet last longer. Directions for mixing and application can be found with the konnyaku starch label.
Start by cutting all your pieces to size with a utility knife and ruler. You should have decorative paper for the outside roughly 25.5cm x 12.5cm, as well as two pieces of decorative paper 12cm x 4 cm. The two pieces of solid paper you will need should measure 27cm x 9.5cm and 8cm x 9.5 cm.
Next use your bone folder to pre-score the folding points. On the outside decorative paper score a border all around the edge of the paper that measues 1cm wide. To help reduce bulk at the corners when folded, cut off the corner points of the paper at a 45 degree angle. Next, starting from inside your scored border, measure and score a line at 4.5cm and 19cm. On the solid interior paper score a line at 11cm , 17.5cm and 23.5cm. The smaller inside piece just gets folded in half on the 8cm side.
Now it is time to start gluing and assembling. First start by folding the two small decorative pieces in half on the 12cm side and glue down. You are left with two double sided pieces measuring 6cm x 4cm. At this point you can also glue down the two end border flaps on your decorative paper.
The first pocket is made by lining up the first score line on the exterior paper and the fold of the 8cm x 9.5cm interior paper. Keep the paper folded and bring the top and bottom flaps over and glue down. The top and bottom flaps can be glued down 3/4 of the way across the length of the wallet. But be sure to leave the last quarter of the flap free at this point.
Fold the section over and paste down… sandwiching the tabs in. This is the first pocket completed!
The next step is to build the interior accordion pocket. Fold the two small decorative pieces into quarters, making a zig-zag shape. Position the pieces straddling the folds of the interior paper and glue into place.
Next you can glue down the front flap, trapping the folded edge of the decorative paper inside. The accordion pocket insert is now complete!
To finish assembling the paper wallet, line up the fold of the small flap with the pre-scored line on the outer paper. Just like we did on the first pocket, line up folded, bring the top and bottom border flaps over and glue everything down.
Fold over and glue down, sandwiching all the tabs of the decorative paper between the solid paper.
The last step is to fold over once more, tucking the small overlap inside the first pocket. Make sure everything is pasted together well. It is a good idea to place your wallet under some heavy books or other weights to keep in from warping while all the glue dries.
Your paper wallet is complete! Enjoy!
For the wallet I made in the photos I used Katazome-Shi decorative paper and Moriki Kozo solid colour paper, they can both be found in The Paper Place online shop.





























Entries